Umtausch innerhalb
von 14 Tagen
Kostenloser Versand
ab 100€*
Lieferung
in 24 bis 48 Stunden
Sichere
Zahlung
Zahlungserleichterung
Bestpreisgarantie
GrowLED
Garantie
Treuepunkte
Artikel wurde in den Korb gelegt
Ça pousse dans le bon sens
0 Produkte
A refurbished air extractor with temperature control is the perfect solution to equip your grow room without breaking the bank. These smart ventilation systems automatically regulate extraction based on ambient temperature, ensuring a stable climate for your plants. Refurbished equipment offers the same performance as a new model, with the advantage of a reduced price and a lower environmental impact.
Automatic temperature management is where it changes everything in an indoor growing setup. No more sudden variations that stress your plants! These extractors integrate a thermal probe that triggers extraction as soon as the temperature exceeds the programmed threshold, generally between 24°C and 28°C. Refurbished equipment undergoes rigorous checks: motor verification, probe testing, complete cleaning, and replacement of wear parts if necessary.
Energy savings are considerable compared to an extractor that runs continuously. Thermal regulation can reduce electricity consumption by 40 to 60% depending on conditions. And frankly, for identical performance to new, saving 30 to 50% on the purchase price is worth it. Refurbished equipment retains its adapted manufacturer's warranty, proof of confidence in the refurbishment process.
The extraction flow rate is calculated based on the volume of your grow room multiplied by a coefficient depending on your lighting. For LEDs, count 1 to 1.5 times the volume per hour. With HPS, go up to 2 to 3 times the volume. A 1.2m x 1.2m x 2m (2.88m³) grow tent will require an extractor of 300 to 400 m³/h with LEDs, 600 to 800 m³/h with HPS.
The thermal regulation range must match your needs. Basic models trigger extraction at a fixed temperature (often 25°C), while advanced versions offer precise programming between 15°C and 35°C. Noise level also matters: aim for less than 45 dB for residential use. Check that the refurbished equipment includes the thermal probe and its cable, sometimes sold separately with new items.
The basic calculation: grow tent volume × coefficient according to lighting. For LEDs (low heat dissipation), multiply by 1 to 1.5. For HPS or MH (high heat), multiply by 2 to 3. An 80×80×160cm (1.02m³) grow tent with LEDs requires 100-150 m³/h, with HPS 200-300 m³/h. Add 20% if you use a carbon filter, which reduces the flow rate. Don't forget that temperature management allows for automatic modulation according to real needs.
A refurbished extractor offers 30 to 50% savings on the new price for identical performance. The equipment undergoes a complete refurbishment process: disassembly, cleaning, bearing inspection, motor and thermal probe testing. Wear parts are replaced if necessary. Reliability is ensured by an adapted warranty, generally 6 months to 1 year. This is professional equipment that can operate for years; refurbishment gives it a second life without compromising quality.
Place the extractor at the top of your grow tent, opposite the fresh air inlet to create an optimal diagonal flow. The thermal probe should be positioned at mid-height, near the plants but not directly under the lighting to avoid false readings. Use rigid or semi-rigid ducts to limit pressure losses. Avoid 90° elbows, which reduce flow by 15 to 20%. The passive air inlet should be 1.5 times the outlet section to balance pressures.
The extractor expels hot, humid air outwards, creating a vacuum that draws fresh air through passive inlets. The intake fan actively pushes fresh air into the grow tent. For most setups, an extractor alone is sufficient with well-sized passive air inlets. An intake fan becomes useful if your air inlets are limited, if you want to filter incoming air, or for larger grow tents (over 3m²). Temperature management on the extractor can control both devices simultaneously.
Clean the blades every 2-3 months with a brush or dry cloth to prevent dust accumulation that unbalances the rotor. Check the fasteners and tighten if necessary, as vibrations can loosen screws. Check the thermal probe: clean it gently and ensure it is not obstructed by residues. Every 6 months, disassemble and grease the bearings if your model allows it. Replace ducts if they degrade, as a punctured duct reduces efficiency. A well-maintained extractor retains its performance for 5 to 10 years.
Hilfe & Beratung
Zu Refurbished — klicken Sie auf eine Frage, um die Antwort zu sehen.
Der Hauptunterschied ist der Preis! Ein generalüberholter Abluftventilator hatte bereits ein erstes Leben, wurde aber gründlich überprüft, gereinigt und bei Bedarf repariert, um seine ursprüngliche Leistung wiederherzustellen. In der Praxis stelle ich fest, dass die Qualität und Zuverlässigkeit sehr nahe an die eines neuen Modells heranreichen, jedoch zu deutlich günstigeren Kosten. Das ist eine ausgezeichnete Option für ein kontrolliertes Budget.
Die Temperaturregelung ist ein großer Vorteil für den Indoor-Anbau. Sie ermöglicht es dem Abluftventilator, sich automatisch an die Bedürfnisse deiner Pflanzen anzupassen. Konkret erhöht oder verringert der Abluftventilator seine Absaugleistung je nach der von dir eingestellten Temperatur. Dies gewährleistet ein stabiles Klima, vermeidet thermischen Stress und fördert ein optimales Wachstum. Diese Funktion empfehle ich dringend für den Komfort deiner Kulturen.
Das ist eine ausgezeichnete Frage und eine berechtigte Sorge. Um die Zuverlässigkeit zu gewährleisten, rate ich dir, immer bei spezialisierten und anerkannten Händlern zu kaufen, die eine Garantie auf ihre generalüberholten Produkte anbieten. Ich persönlich überprüfe jedes Gerät, um sicherzustellen, dass es einwandfrei funktioniert. Eine gute Generalüberholung umfasst strenge Tests und oft den Austausch von Verschleißteilen. Zögere nicht, Fragen zum Generalüberholungsprozess zu stellen.
Die Wahl der Leistung ist entscheidend. Ich empfehle, das Volumen deiner Growbox (Länge x Breite x Höhe) zu berechnen und diese Zahl mit 30 bis 60 (je nach gewünschtem Wärme- und Feuchtigkeitsniveau) zu multiplizieren, um den benötigten Luftdurchsatz in m³/h zu erhalten. Es ist immer besser, einen leicht überdimensionierten Abluftventilator zu wählen, den du mit geringerer Geschwindigkeit laufen lassen kannst, was oft leiser ist und seine Lebensdauer verlängert. Für allgemeinere Ratschläge zur Ausrüstung kannst du Ressourcen wie dieses Video über Komplettpakete konsultieren.
Die Wartung ist einfach, aber unerlässlich für die Langlebigkeit deines Abluftventilators. Ich empfehle, die Lüfterflügel und das Innere des Gehäuses regelmäßig zu reinigen, um die Ansammlung von Staub und Harz zu vermeiden, die die Effizienz verringern und den Geräuschpegel erhöhen kann. Überprüfe auch die Temperatursensoren, um sicherzustellen, dass sie nicht verstopft sind. Eine regelmäßige Wartung gewährleistet, dass dein System optimal und leise funktioniert.
Der häufigste Fehler, den ich sehe, ist die mangelnde Abdichtung des Abluftkreislaufs. Luftlecks können die Effizienz deines Systems beeinträchtigen und die Temperaturregelung ungenau machen. Ich rate dir, robuste Schlauchschellen und spezielles Klebeband für Lüftungskanäle zu verwenden. Stelle außerdem sicher, dass die Abluft gut aus dem Anbauraum abgeleitet wird, um ein Recyceln von warmer und feuchter Luft zu vermeiden.
Ihre Antwort nicht gefunden? 01 88 33 45 52 oder per Nachricht.

Umtausch innerhalb
von 14 Tagen

Kostenloser Versand
ab 100€*

Lieferung
in 24 bis 48 Stunden

Sichere
Zahlung

Zahlungserleichterung

Bestpreisgarantie

GrowLED
Garantie

Treuepunkte